What batteries does the swiffer wet jet take? (2024)

What batteries does the swiffer wet jet take?

Firstly, let's address the question of what kinds of batteries the Swiffer Wetjet needs. The Wetjet uses 4 AA batteries. You can use disposable ones, or rechargeable AAs for a more environmentally friendly cleaning experience.

Why is my Swiffer WetJet not working with new batteries?

However, if you have changed the batteries and still do not hear the motor running, the pump motor may be clogged, rusty and needs to be lubricated.

How long does a Swiffer battery last?

It states the vac will run for about 10 - 12 minutes on one charge, then need to be charged for 16 hours.

How long do Swiffer wet jets last?

Durability - This isn't a huge con since my last one lasted around 2 years but this definitely isn't a buy it for life product. Expect to replace it every few years. Overall the swiffer wet jet is a decent mop that can be made into a great little mop if you upgrade the pads.

How do you prime a Swiffer Wet Jet?

You may need to prime your WetJet before the first use by holding the spray button for a few moments. Call us at 1-800-742-9220 if we can help further.

Can you replace the battery in a Swiffer sweeper vac?

If you have charged your battery for 12-18 hours and the device still won't turn on, the battery can no longer hold a charge and will need to be replaced. A new battery can be purchased via this link: purchase new battery. Once you have purchased a new battery, you can replace it in the battery replacement guide.

Does Swiffer leave residue?

Swiffer is designed not to leave a residue and should provide a great clean on virtually any floor in your home. For best results, make sure the product is suitable for your floor. Do not use Swiffer Wet cloths or the Swiffer WetJet on unfinished, oiled or waxed wooden floors, non-sealed tiles, or carpet.

Why does my Swiffer WetJet leak?

If the bottle drips, the clear rubber seal is damaged, and the refill will need to be replaced. -Make sure the solution bottle has fully clicked into the device. -Make sure the narrow side of the solution bottle is against the pole. -Bottle is not meant to be opened or refilled; additional bottles are sold separately.

Does Swiffer have a warranty?

A One-Year Warranty On Our Swiffer Products

Sit back and relax. Our product warranties provide you with complete satisfaction.

How often to replace Swiffer wet jet?

Replace the WetJet pads after every use.

Put a new pad onto the bottom of your Swiffer so that it's all set to go next time you need to mop your floors.

Can you use a Swiffer Wet Jet Dry?

You can attach these dry swiffer cloths to the wet jet stick and use them to dry wipe the floor, but they are not compatible with the wet solution and are not made to mop the floor. You need to use the swiffer wet jet cloths or just a rag with the mopping solution.

Why is my spray mop not spraying?

Double-check that the mop poles are securely in place, with the white tabs clicked through the metal hole. Otherwise, the trigger won't work. Test the spray trigger. If it doesn't give some resistance check the poles again.

How long does it take for Swiffer to charge?

Do you throw away Swiffer WetJet pads?

Put disposable cleaning pads and dusters into your black cart as garbage. This includes items like Swiffer cloth refills, WetJet pads, wet mopping cloths, and dry cloths.

Is it better to use a mop or Swiffer WetJet?

When comparing these two Swiffer products side-by-side, the WetJet is miles ahead of the Sweeper in terms of mopping performance. With the WetJet, you can apply as much or as little solution as you need, and it's quicker and easier to attach and remove the cleaning pads.

Is Swiffer as good as mopping?

While a Swiffer is a great tool for everyday cleaning (especially if you vacuum first), don't use it if there's a lot of dirt or other debris on your floors. These bigger messes might be a better job for the Swiffer WetJet, or a regular mop or vacuum.

Why do Swiffers stop working?

If your Wetjet won't spray, it's possible that your batteries have worn down and need to be replaced. That's especially likely if the power of your spray slowly decreased before it stopped altogether, or if your Wetjet has been sitting in a closet for a while.

How do you make Swiffer WetJet spray?

Can you use vinegar and water in Swiffer WetJet?

DIY Homemade Swiffer WetJet Solution #3

Mix equal parts hot water and vinegar in a bucket or pitcher (a cup or two of each will work.) Dump in a splash of rubbing alcohol to keep anything gross from growing in the Swiffer refill container. As an option, add a couple drops of essential oil.

Can you put Pine Sol in a Swiffer WetJet?

My "Swiffer Wet Jet": 1-2 Tbsp. Pine-Sol in a 1 qt. spray bottle of water. Spray floor as you mop!

What is a substitute for Swiffer liquid?

If you have a Swiffer Sweeper, there is absolutely no need to buy a WetJet or wet mopping pads! Instead, fill a spray bottle with floor cleaner solution (1 part water, 1 part vinegar, 2-3 drops of dish soap) and spray the area of floor that you want to mop.

How long does a Swiffer WetJet last?

Durability - This isn't a huge con since my last one lasted around 2 years but this definitely isn't a buy it for life product. Expect to replace it every few years. Overall the swiffer wet jet is a decent mop that can be made into a great little mop if you upgrade the pads.

What is the production code for the Swiffer Wet Jet?

Swiffer WetJet Kit (92811/32694)

Why is my floor still dirty after I Swiffer?

Avoid Using Too Much Soap

Soap only lifts dirt and oil into water, making them suspend in water. Therefore, the more soap you use, the more your mop gets saturated with dirt. So, if you do not remove all the soapy water from the floor, the dirt remains, forming streaks on the floor.

Can you put Pine Sol in a Swiffer wet jet?

My "Swiffer Wet Jet": 1-2 Tbsp. Pine-Sol in a 1 qt. spray bottle of water. Spray floor as you mop!